5
Setup Scenario 2: Small band recording
Computer*
Grand piano*
Power
Headphones*
Headphone
amplifier*
Headphones*
Guitar*
(Vocal)
Microphone*
Headphones*
Use this setup to record a small band. Connect your computer to the rear panel USB port, and remember to select M-Trac
Quad as your computer's default device for recording and playback (see the following Audio Setup section for more
information). Connect your microphones to Channels 1 and 2 and activate the phantom power switch for those channels.
Connect your stereo overhead mics to Channels 3 and 4. Set all the Mic/Line/Inst Switches to Mic/Line. Connect a multi-
channel headphone amp to the rear panel Audio Outputs. Connect your performers' headphones to the amp, connect your own
headphones to the front panel headphone jack, and adjust the volume of all of these with the Monitor Level knob.
* not included.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
