M-Audio oxygen25

19
• NC2: Mackie 2 will send standard Mackie messages, but with higher resolution for the pan
pots. If your DAW's pan isn't able to do a full sweep of the pan pot, use Mackie 2. Mackie
control is typically used for DAWs like Cubase, Studio One, Logic, and Reaper.
• M|h: Mackie/HUI will send standard Mackie/HUI messages for DAWs like Pro Tools.
• N1: MIDI 1 will send 1 set of standard MIDI messages for use with Ableton.
• N2: MIDI 2 will send 1 set of standard MIDI messages for use with MPC Beats, and
Reason.
• N3: MIDI 3 will send 1 set of standard MIDI messages for use with Ableton for controlling
clip launching, and more advanced features.
12. DAW (LED): This LED will be lit solid when DAW mode is active.
Faders/Buttons
13. Faders 1-9: Sends different
types of standard MIDI CC
messages or advanced MIDI
messages based on the
assigned parameter or the
active preset.
DAW Mode: Sends channel
Fader messages for Track
Faders or other DAW
controls.
Preset Mode: Sends predefined messages or user editable MIDI CC messages.
14. Fader Buttons: These mappable buttons can be assigned to send Note, CC, and other MIDI
messages.
DAW Mode: Sends Mackie/HUI messages or predefined CC messages for Track Rec Arm, Track
Select, Track Solo, and Track Mute.
Preset Mode: Sends predefined messages or user editable MIDI CC messages.
15. DAW BUTTON MODE: When in DAW mode and SHIFT and this button is pressed, it will change
the Fader buttons’ modes between Track Rec Arm, Track Select, Track Mute, or Track Solo.
Knobs/Transport Controls
16. Knobs 1-8: Sends different types of standard MIDI CC
messages or advanced MIDI messages based on the
assigned parameter or the active preset. Each knob can
be individually assigned to a different MIDI parameter.
DAW Mode: Sends predefined Mackie/HUI, Mackie
messages or predefined CC messages for Track
Panning, Device, or Sends.
Preset Mode: Sends user editable MIDI Messages in
preset 1-10.
17. (Loop): Press this button to activate/deactivate the loop function in your DAW.
18. (Stop): Press this button to stop the open song in your DAW.
Double-press this button to stop the open song and return the playhead to the beginning of the
song.
19. (Play): Press this button to play the song in your DAW.
20. (Record): Press this button to activate recording in your DAW.