M-Audio Ozone - M-Audio Ozone Technical Specifications

M-Audio Ozone Technical Specifications
General
• Supports 24-bit or 16-bit audio input or output
• Supports the following sampling frequencies (Hz): 8000, 11025, 12000,
16000, 22050, 24000, 32000, 44100, 48000, 88200, 96000
• (Note: Because of USB bandwidth and device hardware constraints,
there are limitations on what combinations of bit width and sampling
frequency can be used in full-duplex mode (i.e.-input and output active
simultaeneously))
1/4" Outputs 1 & 2
• Dynamic Range: 100 dB (typical, -60 dB input,A-weighted)
• S/N: 100 dB (typical, A-weighted)
• THD: <0.002% (typical)
Mic/Inst Input
• Dynamic Range: 100 dB (typical, -60 dB input,A-weighted)
• S/N: 100 dB (typical, A-weighted)
• THD: <0.002% (typical)
1/4 AUX Inputs 1 & 2
• Dynamic Range: 95 dB (typical, -60 dB input,A-weighted)
• S/N: 95 dB (typical, A-weighted)
• THD: <0.009% (typical)
47
Tested to
comply
with FCC
Standards
For Home or Studio Use