6 ADDING A NEW CODE/USER
1
Press and hold ‘1’ until a double signal sounds. The LED will illuminate when performing the
following actions:
9
8
7
6
5
4
• Enter your personal Manager Code
For example!
9
9
9
9
9
9
• Enter the new User Code
9
9
9
9
9
9
• Enter the new User Code again
If an incorrect code is entered on the second occasion, a long signal sounds and the old code remains
valid.
7 DELETE SECOND USER
3
Press and hold ‘3’ until a double signal sounds. The LED will illuminate when performing the following
actions:
9
8
7
6
5
4
• Enter your personal Manager Code
The user has been deleted.
8 SETTING THE TIME DELAY AND OPENING WINDOW TIME
Time delay: The time between the first and second code entry in minutes.
Open window time: The period of time in minutes during which the code can be entered a second
time and the lock can be opened.
Changing or deleting the time delay values can only be done in open window time.
To Next Page
Loading...
