6 www.m-locks.com
5 CHANGING CODE (WITH THE DOOR OPEN!)
0
Press and hold ‘0’ until a double signal sounds. The LED will illuminate when performing the following
actions:
1
2
3
4
5
6
• Enter the old code
For example:
9
8
7
6
5
4
• Select your new personal code. Enter the new code
9
8
7
6
5
4
• Enter the new code again
If an incorrect code is entered on the second occasion a long signal sounds and the old code remains
valid.
MANAGER INSTRUCTIONS
6 ADDING CODES / USERS
With the manager code, up to nine additional opening codes can be added or deleted.
1
Press and hold ‘1’ until a double signal sounds. The LED will illuminate when performing the following
actions:
9
8
7
6
5
4
• Enter your personal Manager Code
1
• Enter User ID (1-9). If already occupied a long signal sounds.
For example:
9
9
9
9
9
9
• Enter the new User Code
To Next Page
Loading...
