EasyManua.ls Logo

M-LOCKS EM2050 - Symbols and Signals

M-LOCKS EM2050
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
www.m-locks.com
Multi Level Software Locks
V03 EN
2 SYMBOLS AND SIGNALS
double audible tone, correct
entry
LED flashes
1
2
...
digit on keypad
long audible tone, incorrect
entry
LED illuminated
press and hold
3 OPENING IN STANDARD MODE
For example!
1
1
1
1
1
1
EM2050: Enter the code (i.e. 1-1-1-1-1-1)
After entering a right code, a double signal sounds, you can now unlock the door and open it. If the
door is not opened within 3 seconds, the lock will automatically lock again.
EM3550 / EM40450:
After entering a right code (i.e. 1-1-1-1-1-1), a double signal sounds, you can now open the lock,
unlock the door and open it. If the lock is not opened within 3 seconds, the lock will automatically lock
again.
!
Caution!
The lock has been designed for use in a temperature range from +10˚C to +50˚C and a non-
condensing humidity range from 30% to 80%.
It may only be cleaned with a moist cloth (do not use aggressive cleaning agents).
The lock may only be installed by qualified fitters.
The lock may not be lubricated.
Never open the lock housing. If it is necessary to disassemble the hardware, only do so in accord-
ance with the technical instructions. If you fail to do so, the lock may no longer function properly
and you will forfeit your right to warranty.
Dallas Key

Related product manuals