M-system 47LV - Page 15

47LV
P. 15 / 18EM-9502-B Rev.3
■ ADVANCED SETTING MODE
Shift
Shift
Alarm/
Moving Average
Measuring Mode
Brightness
Automatic Return Time
to Measuring Mode
Transition Time to
Lockout Setting Mode
C1 / C2 / C3 / C4 / C5
00...99
00...99
00.0...99.9
Hold down Alarm/ + Scale/ button
at once for ≥3 seconds
Hold down Alarm/ or Scale/ button
for ≥1 second
Shift
Shift
Alarm/
Alarm/
Alarm/
Alarm/
Alarm/
Alarm/
Alarm/
Shift
Alarm/
Alarm/
Advanced Setting Mode
Version Indication
Display Refreshing Rate
OFF / 2 / 4 / 8 / 16 / 32 / 64
Alarm/
A
A
Set value
Setting Parameters
Shift
Scale/
Alarm/
Low End Cutout
Low End Cutout Value
OFF / ON
00...99
Shift
Alarm/
Scale/
Alarm/
Alarm/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
• Alarm output pattern
Alarm trips according to the setpoint and the trip action (direction) setting.
P indicator turns on when all other alarm indicators are off.
HH setpoint
H setpoint
L setpoint
LL setpoint
/ High trip
/ High trip
/ Low trip
/ Low trip
LL L P H HH
ON
ON OFF
OFF
OFF
ON
ONOFF
OFF
OFF
ON
HH setpoint
[Example] Typical LL / L / H / HH trip setting [Example] All trip points set to High setting
H setpoint
L setpoint
LL setpoint
/ High trip
/ High trip
/ High trip
/ High trip
LP LL H HH
ON
OFF
OFF
OFF
OFF
ON
OFF
ON
ON
ON