M3 Mobile M3 Orange - Application Usage; Bluetooth Configuration and Connection

Application usage
27
3. Application usage
3.1 Bluetooth
3.1.1 Bluetooth configuration
Turning on
Click on Bluetooth icon on task bar ( ) and choose ‘Enable Bluetooth’ to turn
on the Bluetooth module. Once the Bluetooth is on, the task bar icon will change to
to indicate it is enabled.
To turn it off, simply disable the Bluetooth after click on icon from task bar.
M3 ORANGE can use two different Bluetooth stacks:
1. StoneStreetOne (default)
2. Microsoft
Bluetooth stack can be changed from
StartSettingsSystemBT Select
The device must go through power cycle after stack change.
3.1.2 Getting connected
Set Bluetooth Connection
Bluetooth connections can be configured using BTExplorer. To launch BTExplorer,
click on Bluetooth icon on task bar ( ) and choose ‘Show BTExplorer’.