M3D END USER AGREEMENT: This agreement between M3D LLC (a company incorporated under
the laws of the State of Maryland in the United States), and you, the END-USER, which describes
important disclaimers, indemnity, safety instructions, software information, and limited warranty
information about its products and govern the conditions of use. PLEASE READ THESE TERMS
CAREFULLY as continuing this installation process and using M3D products and software indicates
agreement with these terms. You acknowledge that you have read and understand this agreement in
its entirety, and accept the terms of this end-user agreement.
INDEMNITY: You understand that 3D printers are an experimental technology and that they were
intended for use under the guidelines provided in the user manual and this agreement. You
understand and acknowledge that the user manual only describes the best practice for operating
The Micro 3D Printer, and that even the best practice for operating the printer is not always
presumed as safe. You agree to hold harmless and indemnify M3D from any personal injury that
results from using its products. You are responsible for any damage or injury that may occur as a
result of using M3D products. You understand and agree that M3D is not responsible for any injury,
damage and/or loss of accessories, components, consumables, and information that may occur
during the use of the product. You agree to hold harmless and indemnify M3D from any liabilities
that result from any of the following conditions: 1) modification of The Micro 3D Printer, its
consumables, and/or software; 2) use of third-party software; 3) use of any custom 3D models; 4)
use of third-party power supplies or USB cables; 5) use of third-party consumables such as print
beds, print bed surfaces sheets, print bed adhesives, and filaments; 6) use of The Micro 3D Printer
and/or its components in any way other than intended, as described in the user’s manual; 7)
operation of The Micro 3D Printer or use of M3D filaments; and 8) Printing of custom objects which
results in any physical hazard, legal suit, and/or intellectual property infringement. You agree that
there is no circumstance where M3D will be held liable for any damages, including but not limited to
loss of anticipated profits, business, opportunities, saving, or deals due to late delivery, performance
characteristics, repair, business interruption, or any other disapproval of M3D’s products or services.
You agree to hold harmless and indemnify M3D from having any additional responsibilities to
anyone other than you, the end-user.
INTELLECTUAL PROPERTY: M3D and its products and services include proprietary and privileged
information, also known as trade secrets. M3D® is a registered trademark of M3D LLC. Design and
utility patents pending.
CONDITIONS OF USE: You understand and acknowledge that the user manual for M3D’s products,
this end-user agreement, and the limited warranty may have been provided as a physical copy where
required by law, with the initial customer purchase. A digital copy of this agreement and the end-user
agreement can be found online at www.printm3d.com if you are not the purchasing customer.
Before attempting to use The Micro 3D Printer, you agree to read the Micro 3D Printer user manual,
which contains important disclaimers, warranty, and safety information. If you are not the
purchasing customer and first end-user, you must access a digital copy of the manual from our
website. All terms and conditions of this agreement are subject to change, such as may be
necessary by law. M3D reserves the right to log your acceptance of this agreement locally in your
computer or as needed and allowed by law. M3D Consumables will be made available by M3D and
its distributors. Any consumables included as part of an initial purchase does not imply inclusion of
those consumables with a future purchase. As an end-user, you agree that without the written
consent of M3D, you will not disassemble, decompile, modify, enhance, reverse engineer, or tamper
with, attempt to identify trade secrets, or attempt to circumvent safety features of M3D products
and software. M3D is bound by US law and cannot send its products to any customers in
embargoed locations, and individuals, entities, and corporations are screened against various export
enforcement, a.k.a. “blacklists.” This includes links or access to software products. If you are on the
blacklist, you must not accept this agreement.
SOFTWARE: M3D software will be included with a limited, non-exclusive license as part of each
purchase of a Micro 3D Printer. The M3D software is under development and is supported by M3D
through downloadable updates. Specifications of the printer and software functionality may be
expanded or modified by the software through updates. These include but are not limited to:
operating system functionality; printer speed; print quality; build volume; and print resolution and
accuracy. Software development updates are intended for ongoing product performance
improvement and may require temporary reversion to older performance parameters as other
features are tested, improved, or enabled. M3D reserves the right to contact our remote server in
future versions of the software for the purpose of comparing software versions and downloading
remote software updates. M3D software updates include firmware updates which may be pushed to
The Micro 3D Printer. The M3D software includes terms and agreements that differ from the
customer purchase agreement. The M3D software is proprietary and its design and contents are
protected by law. Attempts to deconstruct / reverse engineer the software are considered illegal as
provided by copyright law and fair use; trade secrets; patents pending; and additional local, state,
and federal laws where applicable. All parts of this section apply to any end-user and are fully
transferrable to any user.
To Next Page
Loading...
