Need help?Do you have a question about the m3d Micro+ and is the answer not in the manual?
General| Build Volume | 109 x 113 x 116 mm |
|---|---|
| Layer Resolution | 50 - 350 microns |
| Filament Diameter | 1.75 mm |
| Connectivity | USB |
| Supported Materials | PLA, ABS |
| Printer Dimensions | 185 x 185 x 185 mm |
| Weight | 1 kg |
| Operating System Compatibility | Windows, macOS |
| Power Requirements | 100-240V, 50-60Hz |
Details on build volume, resolution, filament, nozzle, speed, and precision.
Instructions for removing the printer from packaging and identifying accessories.
Removing gantry clips and general safety precautions during setup.
Guide to obtaining and installing the necessary printer software.
Steps for connecting via USB, power, and safe power-off procedures.
Guidance on installing filament internally or externally.
Advice on ensuring filament is properly caught by the extruder gear.
Notes on pre-installed filament and using cheat codes for material types.
Steps for performing a quick calibration of the print bed location.
Instructions for loading 3D models and initiating the printing process.
Tips for observing the first layer and potential print issues like nozzle height and peeling.
Information on accessing online support and language documentation.
Explanations of print quality, fill density, support material, and bed location.
How to adjust model size, position, orientation, and tips for faster prints.
Hazards associated with the printer, hot parts, and small components.
Information on maintenance, part replacement, repair, and return policies.
Precautions when removing parts or prints from the printer.
Terms and conditions for using the M3D printer and software.
Usage guidelines, intellectual property, and legal restrictions.
To Next Page
