Need help?Do you have a question about the m3d Micro and is the answer not in the manual?
General| Print Technology | Fused Filament Fabrication (FFF) |
|---|---|
| Layer Resolution | 50 - 350 microns |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB |
| Supported Materials | PLA, ABS, Nylon |
| Dimensions | 185 mm x 185 mm x 185 mm |
| Weight | 1 kg |
Outlines user responsibilities and usage rules for M3D products and software, including licensing and terms.
Specifies user's responsibility to hold M3D harmless from liabilities arising from product use and specific conditions.
Covers choking hazards, printer as a toy, hot parts, ventilation, material contact, and maintenance needs.
Details M3D software licensing, updates, proprietary nature, and warranty terms for end-users.
Summarizes terms for repair/service, returns, and intellectual property, including trademarks and patents.
Provides a general description of The Micro 3D printer and its capabilities for making custom creations.
Lists detailed technical specifications of the M3D printer, including build volume, resolution, and weight.
Step-by-step guide on connecting The Micro printer to a computer via USB cable.
Instructions for connecting the power supply to the printer and wall socket, and for safe detachment.
Guide for downloading and installing the M3D software, including firmware and software updates.
Detailed steps for loading filament into the external feed port using the M3D software interface.
Detailed steps for loading filament into the internal feed port, including print bed access.
Instructions on obtaining 3D models from online databases and importing them into the M3D software.
How to scale, rotate, and move 3D models within the M3D software's graphical user interface.
Steps to start printing, confirm preferences, view estimated time, and monitor the printing process.
Provides resources for troubleshooting, including FAQs, submitting support tickets, and joining community forums.
Step-by-step guide to removing filament from the external feed port using the M3D software.
Step-by-step guide to removing filament from the internal feed port, accessing the compartment.
To Next Page
