MA 4Port Node
Data
Transport
Safety
instructions
Safety and
environmet
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
26
Data
Current: 100 – 240 V ~ (+/- 10%) 50 / 60 Hz (USA, Canada
Automatic operation, no switching necessary!
Power cable: Only adequately protected cables may be used
(min. Ø = 3 x 1,0mm²).
Required plug connector: PowerCon connector (blue)
MA 4Port Node)
Required plug connector: Must meet the standard in the respective country. The plug
Power source connector is not included in delivery.
The socket should be serviced by qualified personnel only!
Power input: max. 20 VA
To Next Page
Loading...
