© 2022 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-30 - support@malighting.com - www.malighting.com
Additive (= default):
Additive keeps the difference between dimmer values until they reach 0% or 100%, using the level wheel. After 0% or 100
% are reached, the values will be leveled out.
Example:
Fixture 1 has a value of 50 and fixture 2 is at 60. When the level wheel is used to take them both up to 100, and then
back down, they both go down from 100 at the same time and the same level.
Incremental:
Incremental keeps the difference between the dimmer values always, even if you reached 0% or 100% by using the
dimmer wheel.
Example:
Fixture 1 has a value of 50 and fixture 2 is at 60. When the level wheel is used to take them both up to 100, and then
back down, fixture 1 will start coming down first and then fixture 2 will follow when fixture 1 is at 90.
Prop.+ (Proportional positive):
When using the level wheel to turn up the dimmer values, the difference in the dimmer values will decrease. Turning up to
100% will make all channels reach 100% at the same time.
Prop.- (Proportional negative):
When using the level wheel to turn up the dimmer values, the difference in the dimmer values will increase. Turning down
the values will make all channels reach 0% at the same time.
To Next Page
Loading...
