mabe ITV085ICER - Ref Sensor Replacement

Page 14
PRINTED : JAN’2015 REF NO. SM7715010-01-11
Part Name
Ref Sensor.
Operating Procedure
- Follow step 1-6 of replacing Chill LED Lights.
1. Release screws. 2. Pull out Multi-Duct Assy 3. Pull out socket.
4. Pull out Multi-Duct Ins. 5. Remove all paper tape. 6. Remove all Seal.
7. Remove all Sensor. 8. After replacing Sensor, reverse the
steps above.