- 14 -
Replacement of batteries in remote control
1. Turn four remote control over and remote the battery coverd along the arrow direction
as shown in the figure.
Battery
Battery cover
Remove
Reinstall
2. Replace with two #7 (AAA 1.5V) dry batteries.
Make sure positions for “+” pole and “-” pole are
correct.
3. Reinstall the battery cover.
The distance between signal sender and receiving window should be no more
than 8m, and there should be no obstacles between them.
when using the remote control
Replace batteries with the same type when replacement is required.
When you do not use the remote controller for a long time, please remove the
batteries from the comSartmHQt.
NOTICE
Possible sources of interference such as florescent light or wireless devices can
interfere with the remote control signal. So please get closer to the air
conditioner
To Next Page
Loading...
