- 8 -
Notes for installation
Remove
Noise
Electric wiring
Before removing air conditioner to the other place, you
Then it must be done under the direction of the profe-
ssional technician. In addition, the charge of this must
be paid.
enlargement of noise and vibration.
to avoid increasing noise.
there is strange noise during operation.
y.
The exclusive circuit must be used. But removable socket
y.
and leakage current is less than 30mA.
d
necting method of each individual ele
The air conditioner should be installe
regulation.
An all-pole disconnection itch having a contact separation of at least 3mm
) should be installed in the circuit.
facturer or
All The dectrical ork must be done according to the local iring regulations.
To Next Page
Loading...
