mabe MEI18VR - Drain Water Management; Drain Pan and Hose Setup

- 7 -
Drain water :
Drain pan and drain hose need to be installed before use. Drain hose is not
provided please purchase from your local hardware short if needed.Use the
following procedure to install drain pan and drain hose.
1. Slide the chassis out from the cabinet.
2. Install the drain pan provided to the corner of the cabinet with 2 screws.
3. Insert the drain hose into the outlet on the bottom of the drain plan.
4. Slide the chassis back into the cabinet.
The air conditioner is designed to
splash the condensate on the condenser coil to improve cooling capacity and
efficiency.. If the splashing sound
annoy you , please remove the rubber plug
from the chassis to lower the noise, which will reduce the performance slighly.