24
1
2
accessories
meat/defrost tray: This tray can be used to store food
that requires temperatures near freezing, like processed
meats. Another function of this tray is to receive water
generated from the defrost process.
shelves: The shelves of the unit have a side to side design
that gives the support in all kind of food storing. They
are designed to change levels, depending on the space
needed. The shelves are designed to move from one level
to another, depending on the space needed.
To remove the shelves follow the next steps:
1. Remove stored food on the shelf you want to move.
2. Withdraw the shelf from its bump (on some models)
and slide it toward you.
3. Place the shelf in the desired level and be sure it
enters in the security bump (on some models).
4. Shelves have only one position, in which the back
stem matches the hole on the fresh food compartment
walls (do not force them).
vegetable drawer: The vegetable drawer is designed to
preserve the natural moisture and freshness of fruits and
vegetables; however, try not to mix them inside to avoid
bad smelling. Be sure you push the drawer to the rear,
before you close the refrigerator’s door. Some models
have a drawer separation to adjust its position or take it
out if it is required.
3 4
1 2
To Next Page
Loading...
Need help?
General
