EN
29
In
more
detail...
MLM1841
by MacAllister
Care and maintenance
6. Replace this cutting blade after 50 hours mowing or 2 years whichever is
sooner regardless of condition. If the cutting blade is cracked or damaged,
you must immediately replace it with a new one.
7. Lubricate the cutting blade (13c) after each use to prolong the life span of
cutting blade and product. Apply light machine oil along the edge of the cutting
blade.
Grass catcher
Power cord
WARNING!
Do not use the product with a defective or a loose power
cord (4) and inter-connection cord (18)!
1. Inspect the grass catcher (7) before each use. Do not use it if you nd any
damage.
2. Clean the grass catcher (7) after operation using water and mild soap.
3. Let the grass catcher (7) dry thoroughly before storing to avoid mildew.
If the power cord (4) or inter-connection cord (18) is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualied persons in
order to avoid a safety hazard.
13d 13c
13b
13a
Fig. 18
Fig. 18
To Next Page
Loading...
