18
TURN ON
Press and hold the button on the top of the
speaker. The power up tone sounds and the LED
indicator starts blinking rapidly blue.
After a few seconds, the speaker goes to Bluetooth
pairing mode to set up with your smartphone.
PAIR AND CONNECT
Enable Bluetooth on your smartphone or other
device.
Make sure the LED indicator is blinking rapidly blue.
(If it isn’t, switch the speaker off and on again.)
Choose LiL BiG from the pairing options on your
smartphone. (If it’s not in the list, choose “Scan”
from your phone’s Bluetooth menu.)
The speaker gives an audio signal when it’s finished
pairing and connecting to your smartphone. The
LED indicator is blue.
Note: The process of enabling Bluetooth and connecting
varies from device to device. See your device’s owner‘s
manual for more information and specific instructions.
Press and hold the button for approx. 3
seconds to disable Bluetooth pairing.
To Next Page
Loading...
