Need help?Do you have a question about the MAC SCR Series and is the answer not in the manual?
Steps for the initial setup and installation of the battery charger.
Instructions for safely grounding the battery charger unit to prevent electric shock.
Explanation of LED indicators and their meaning during charge cycles.
Overview of general service procedures and initial checks for troubleshooting.
A guide for quick checks to diagnose common charger problems.
Step-by-step procedure for checking DC circuit components.
Procedure for checking AC input for single voltage chargers.
Procedure for checking AC input for dual voltage chargers.
Procedure for testing SCR components within the charger.
General| Operating Temperature | -20°C to +50°C |
|---|---|
| Output Voltage | 12V/24V/48V (model dependent) |
| Battery Type | Lead-Acid (Flooded, AGM, GEL) |
| Protection | Reverse Polarity, Over Voltage, Over Current, Over Temperature, Short Circuit |
| Charging Stages | Bulk, Absorption, Float |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Cooling | Fan Cooled |
To Next Page