MAC SCR Series - Charge Profile Change Procedure

To Next Page

To Previous Page

9 CHARGE PROFILE CHANGE PROCEDURE

WARNING: This charger may be provided with a manual selectable charge profile feature that

allows for the proper charging of:

(W) = Wet gassing lead acid batteries

(S) = Sealed valve regulated (SVR), gelled/agm type lead acid batteries

Verify charge profile setting after charge begins. A flashing incomplete LED prior to the 80% LED

coming on indicates a (S) sealed valve regulated profile has been selected. If not flashing, charger

is in a (W) wet charging profile.

NOTE: Any chargers having a circuit with date code 9719 or earlier did not incorporate this flashing

LED feature.

CAUTION: Improper profile setting may damage the batteries. To change setting remove cover

and follow instructions in charger.