24
MCS2400 by MacAllister
In more detail...
GB
IE
Operation
Support small logs on a sawing >
stand or another log while
bucking (Fig. 34).
Fig. 34
If the wood diameter is large >
enough for you to insert a
soft bucking wedge without
touching the chain, you should
use the wedge to hold the
cut open to prevent pinching
(Fig. 35).
Fig. 35
After use
Switch the product off, disconnect it from the power supply and >
let it cool down.
Check, clean and store the product as described below. >
Bucking a log
To Next Page
Loading...
