04
MCS2400 by MacAllister
Getting started...
GB
IE
Before you start
Unpack all parts and lay them on a at, stable surface. >
Remove all packing materials and shipping devices if >
applicable.
Make sure the delivery contents are complete and free of any >
damage. If you nd that parts are missing or show damage do not
use the product but contact your dealer. Using an incomplete or
damaged product represents a hazard to people and property.
Ensure that you have all the accessories and tools needed for >
assembly and operation. This also includes suitable personal
protective equipment.
Unpack
24 25
1. Front handle
2. Front guard/chain
brake
3. Saw chain
4. Guide bar
5. Sprocket nose
6. Guide bar cover
7. Locking wheel
8. Tension wheel
9. Cover
10. Air vents
11. Rear guard
12. Rear handle
13. Power cord with
plug
14. Oil tank cap
15. Reset button for
circuit breaker
16. Lock-off button
17. On/off switch
18. Cable strain relief
19. Oil level window
20. Oiling port
21. Support pin
22. Spike bumper
23. Drive sprocket
24. Tension disc
25. Sharpening kit with
instruction manual
To Next Page
Loading...
