EN
1) Warning! Danger. The failure to use this machi-
ne correctly can be hazardous for oneself and oth-
ers.
2) Read the instruction manual before using the
machine.
3) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise le-
vel of 85 dB (A) or higher. Wear ear protectors,
safety goggles and a protective helmet.
4) Danger of flying objects! Keep any people or
pets at least 15 m away when using the machine!
5) Only one cutting line head can be used on this
machine.
6) Do not use pointed, rigid or metal blades or cir-
cular saw blades.
7) Maximum cutting device speed. Only use suit-
able cutting devices.
SYMBOLS 3
2. SYMBOLS
23) Cutting device
rotation direction
11) Fuel tank
12) Engine stop switch
positions
a = stop
b = run
c = start
13) Choke
14) Primer
EXPLANATORY SYMBOLS
ON THE MACHINE (if present)
EXPLANATORY SYMBOLS
ON THE PROTECTION DEVICES (if present)
To Next Page
Loading...
