04
Safety devices
Metal bracket
The metal bracket (13) prevents a workpiece being caught by the cutting disc (2)
and being hurled at the operator.
The metal bracket must always be mounted during operation.
Upper protective guard
The upper protective guard (1) prevents accidental contact with the cutting disc (2)
and stops workpiece parts and cooling water from being flung out.
The upper protective guard must always be mounted during the operation and can
be lowered to the workpiece.
Lower protective guard
The lower protective guard (17) prevents accidental contact with the cutting disc
(2) and stops workpiece parts and cooling water from being flung out.
The lower cutting disc cover must always be mounted during operation.
MTC650 by MacAllister
Getting started...
Your product
EN
To Next Page
Loading...