Need help?Do you have a question about the MacAllister MTC650 and is the answer not in the manual?
Lists and labels all parts of the MacAllister MTC650 tile cutter.
Explains the function of the metal bracket, upper and lower protective guards.
Details technical data like voltage, power, speed, dimensions, and weight.
Warns about risks of silica and wood dust, and provides reduction methods.
Discusses vibration risks and the European directive for power tools.
Advises on employer's health surveillance for vibration-related diseases.
Explains common symbols and abbreviations used in the manual and on the product.
Covers work area conditions, personal attire, and protective equipment.
Details safe tool usage, cord care, securing work, and avoiding overreach.
Specific safety advice for discs, speed, guards, and operating conditions.
Mandatory PPE includes goggles, ear defenders, and breathing masks.
Instructions for unpacking, checking contents, and gathering necessary tools.
Step-by-step guide on how to correctly install the cutting disc.
Steps to remove the hexagon nut and outer flange for disc replacement.
Procedure for placing disc, attaching flanges, and tightening nuts.
Procedure for aligning and attaching the metal bracket to the cutting disc.
Instructions for mounting the upper protective guard to the metal bracket.
Steps for mounting and setting the extension table for wider cuts.
Guide on attaching and adjusting the parallel cutting guide for straight cuts.
Instructions for mounting and setting the mitre cutting guide for angled cuts.
Details on how to correctly fill the water reservoir for cooling.
Essential checks before starting the tool, including safety devices and water level.
Guidance on connecting the tile cutter to the electrical supply safely.
Key warnings before operation, including safety and product damage precautions.
Specifies the correct applications for the tile cutter and prohibited uses.
Instructions for switching the machine on and off safely.
Procedure for performing straight cuts using the parallel cutting guide.
Steps for cutting mitre or diagonal angles using the mitre cutting guide.
Guide on using the vertical fence for angled or bevel cuts.
Essential rules for product care, inspection, and maintenance.
How to clean the product safely without water or solvents.
Instructions for draining and refilling the cooling water reservoir.
Safety precautions and steps for removing and fitting a new cutting disc.
Guidance on power cord damage and how to replace the plug correctly.
Information on product storage conditions and safe transportation methods.
Lists common malfunctions and provides steps for users to fix them.
Advises on proper recycling of electrical products and waste disposal.
Details the 2-year guarantee, coverage, exclusions, and claim process.
Confirms compliance with EU directives and lists referred standards.
General| Brand | MacAllister |
|---|---|
| Model | MTC650 |
| Category | Cutter |
| Language | English |
To Next Page