P0010/082016/Rev.0.0 85
Installing and connecting NEVIS
1. Remove the packaging and protective case.
2. Place the appliance on a flat and stable surface. Make sure that
the surface is water-resistant and that it can bear the weight.
3. Using the mains plug, connect the appliance to a properly
grounded power outlet.
Putting your NEVIS into operation
In this section you will learn how to operate your NEVIS. Before using the
appliance for the first time, it is necessary to make a few adjustments.
Filling the bean container
Note: Only the big bean container can be filled with coffee
beans, NOT the slot designed for cleaning tablets and
powder. Do not use instant or ground coffee!
To Next Page
Loading...