P0010/082016/Rev.0.0 87
1. Open the water tank lid completely
2. Hold the grip of the water tank and pull it slightly to the right.
3. Pull the water tank up.
4. Unpack the AquaViva water treatment agent for 100 liters of water
(supplied) and insert it into the water tank.
5. Fill the tank with fresh and cold (between 4° and 20°C) still water
up to the water level mark.
6. Choose the Menu Button and enter the Owner-Code 1122 and
confirm with OK.
7. Choose the Point „AquaViva/Replacement and follow the
instructions on the Display.
After you have successfully installed the AquaViva water treatment agent,
please choose in the main Menu Settings and Water hardness.
To Next Page
Loading...