6
Introduction
Compliance
The M20.06 has been tested and found to comply with the following
European and international Standards for Electromagnetic Compatibility
and Electrical Safety:
For continued compliance with international EMC legislation ensure that all
input and output cables are wired with the cable screen connected to Pin 1
of the XLR connectors. The input XLR Pin 1 is connected to the chassis via
a low value capacitor, providing high immunity from ground loops whilst
ensuring good EMC performance.
Radiated
Emissions (EU)
EN55013 (1990)Associated Equipment
RF Immunity (EU)
EN50082/1 (1992)RF Immunity, Fast
Transients ESD
Mains
Disturbance (EU)
EN61000/3/2 (1995)
Electrical Safety
(EU)
EN60065 (1993)
Radiated
Emissions (USA)
FCC part 15
Class B
Electrical Safety
(USA)
UL813/ETL (1996)Commercial Audio
Equipment
Electrical Safety
(CAN)
UL813/ETLc (1996)Commercial Audio
Equipment
To Next Page
Loading...