Need help?Do you have a question about the Mackie CR8S-X BT and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Power Output | 200W |
| Amplifier Class | Class D |
| Driver Size | 8 inches |
| Connectivity | Bluetooth |
| Inputs | RCA, TRS, Bluetooth |
| Outputs | TRS |
Connects the supplied AC power cord to the IEC jack.
Turns the subwoofer on/off; front LED illuminates when powered.
Connect line-level signals from mixers or other sources.
Connect to studio monitors.
Adjusts the input sensitivity.
Adjusts the overall output level.
Optimizes subwoofer and monitor performance.
Inverts the subwoofer's polarity.
Connects the supplied CRDV Volume Control.
Controls system and subwoofer output levels independently.
Pair, connect, pause/play audio via Bluetooth.
Read and understand the Important Safety Instructions on page 2.
Make all initial connections with power switches OFF and controls down.
Connect audio sources to subwoofer and monitors, and CRDV to CRDV jack.
Plug line cords into IEC connectors and grounded AC outlets.
Turn on the mixer or other signal source.
Turn on the subwoofer and set level control to unity.
Turn on the monitors and set level control to unity.
Start signal and raise mixer fader to a comfortable level.
Identify warranty coverage provided in your local market.
Retrieve a full-version, printable owner's manual for your product.
Download software, firmware, and drivers for your product.
Register your product.
Contact technical support.
To Next Page
