Need help?Do you have a question about the Mackie Thump18S and is the answer not in the manual?
General| Impedance | 20000 Ω |
|---|---|
| Subwoofer type | Active subwoofer |
| Subwoofer peak power | 1200 W |
| Subwoofer driver diameter | 457 mm |
| Subwoofer frequency range | 30 - 132 Hz |
| Subwoofer driver diameter (imperial) | 18 \ |
| Product color | Black |
| Subwoofer driver diaphragm material | Paper |
| XLR in | Yes |
| AC input voltage | 220 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 150 W |
Weight and Dimensions| Subwoofer depth | 580 mm |
|---|---|
| Subwoofer width | 573 mm |
| Subwoofer height | 672 mm |
| Subwoofer weight | 39500 g |
Covers electrical shock hazards and protection from water/moisture.
Advises on preventing hearing loss from high sound levels and using hearing protectors.
Highlights the subwoofer's power and low-frequency output capabilities.
Provides step-by-step instructions for initial setup and connections.
Details how to connect the AC power cord and important electrical safety.
Explains the operation of the power switch and the power indicator LED.
Explains the balanced XLR input connectors for signal sources.
Details the XLR outputs for sending high-frequency signals to loudspeakers.
Explains the XLR outputs for daisy-chaining or connecting to other audio equipment.
Explains built-in limiter, limiting, and overexcursion protection features.
Provides guidance on AC power requirements, voltage, and safe connection practices.
Guides users through diagnosing and resolving problems like no power or no sound.
Addresses troubleshooting for poor bass, distortion, noise, and hum.
To Next Page
