Need help?Do you have a question about the Mackie SRM2850 and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Output Connectors | XLR |
| Polarity Switch | Yes |
| Enclosure Material | Wood |
| Power Rating | 1600 W |
| Driver Size | 18 inches |
| Input Connectors | 2 x XLR |
| LF Driver Size | 18 inches |
| Inputs | 2 |
| Outputs | 2 |
| Woofer Size | 18 inches |
| Amplifier Power | 1600W Class-D |
Explains how to navigate the manual and understand its sections.
Step-by-step guide to quickly set up the subwoofers.
Important tips and advice for using the subwoofers.
Connects the subwoofer to AC power via the IEC connector.
Controls the power state of the subwoofer.
Balanced XLR connectors for receiving line-level audio signals.
Details the pinout for the female XLR input connectors.
Reverses the polarity of the input signal by 180 degrees for system tuning.
Adjusts input sensitivity and indicates signal presence or limiter activity.
Provides line-level outputs for frequencies above the crossover point.
Details the pinout for the male XLR output connectors.
Outputs the full input signal for daisy-chaining or sending to other audio gear.
Selects between stereo output or a mono sum of inputs for full range signals.
Allows selection of presets or variable frequency for high pass output optimization.
Controls the illumination of the front panel Running Man logo.
Provides solutions for common issues like no power, no sound, poor bass, or noise.
To Next Page
