Need help?Do you have a question about the Mackie Thump 115S and is the answer not in the manual?
General| Outputs | XLR |
|---|---|
| Polarity Switch | Yes |
| Type | Active |
| LF Driver Size | 15 inches |
| Max Peak SPL | 130 dB |
| Inputs | XLR, 1/4" TRS |
| Enclosure Material | Wood |
| Weight | 24.5 kg (54 lbs) |
| Width | 483 mm (19 inches) |
Covers warnings and cautions regarding electric shock, fire risk, and proper connections.
Details potential hearing loss from high noise levels and provides OSHA-specified exposure limits.
Instructions on environmentally responsible disposal of the product according to WEEE directive.
Diagram illustrating a PA system setup with a single powered subwoofer.
Diagram illustrating a PA system setup with two powered subwoofers.
Details on power connector, inputs for mixer signals, and outputs for speakers/subwoofers.
Explanation of Gain, Main LED switch, Polarity switch, and Stereo/Mono switch.
Description of optimizing subwoofer and high pass outputs for specific frequencies.
Steps for making initial connections with power off and setting volume/gain controls.
Instructions on the correct order to turn on the mixer, subwoofer, and loudspeakers.
Guidance on starting the signal source and adjusting the listening level for comfort.
Details on frequency response, maximum SPL, and total system power for both models.
Information on woofer size, amplifier type, and power ratings for THUMP115S and THUMP118S.
Specifications for input/output types, voltage, frequency, and power consumption.
Overview of protection features, size, and weight for the subwoofers.
Information on accessing the owner's manual, downloading software, and registering the product.
Guidance on how to get help from the technical support department.
To Next Page
