To Next PageTo Next Page
Need help?Do you have a question about the Mackie Mix8 and is the answer not in the manual?
General| Microphone input impedance | 3800 Ω |
|---|---|
| Frequency range | 20 - 30000 Hz |
| Channels quantity | 8 channels |
| DJ mixer | - |
| Product color | Black |
| Video capability | No |
| AUX in | Yes |
| Line inputs (RCA) | 2 |
| Equalizer bands quantity | 3 |
Weight and Dimensions| Depth | 244 mm |
|---|---|
| Width | 198 mm |
| Height | 53 mm |
| Weight | 1100 g |
| Package depth | 338 mm |
| Package width | 231 mm |
| Package height | 84 mm |
| Package weight | 1400 g |
Tips for safe and proper initial operation of the mixer.
Connection for external AC power supply and status indicator.
Female XLR connectors for balanced mic or line level inputs.
Provides DC voltage for condenser microphones via XLR inputs.
1/4" jacks for balanced or unbalanced line level signals.
Adjusts input sensitivity for mic and line signals.
Adjusts High, Mid, and Low frequencies for tone shaping.
High-pass filter for channels, cuts bass frequencies below 75 Hz.
Selects input level for channels 5/6 - 11/12.
Tap channel signal for stage monitors or external effects.
Tap channel signal for internal or external effects processing.
Adjusts signal sent to left/right outputs or stereo balance.
Indicates signal overload on channels, preventing distortion.
Adjusts channel output level from off to unity gain.
1/4" TRS outputs for the main mix.
1/4" TRS outputs for monitoring.
Drives standard headphones with adjustable level.
1/4" balanced/unbalanced output for stage monitors.
Connects parallel effects devices or extra line inputs.
1/4" TRS output for external effects processors.
RCA jacks for playback and recording.
Route tape signal to main mix or CR/phones.
Adjusts volume for control room and headphone outputs.
Overall level control for aux sends.
Controls overall signal level sent to main and tape outputs.
Displays output signal levels with LEDs.
Rotary switch to choose from 12 built-in effects.
Mixes processed FX signal into the main mix.
Indicates FX signal presence and overload.
Guidance for resolving power, channel, output, and noise issues.
Details on warranty and non-warranty service procedures.
Detailed technical data including noise, distortion, EQ, and dimensions.
