Need help?Do you have a question about the Mackie MR6mk3 and is the answer not in the manual?
General| Type | Active Studio Monitor |
|---|---|
| Woofer Size | 6.5 inches |
| Tweeter Size | 1 inch |
| Frequency Response | 38 Hz - 20 kHz |
| Input Connectors | XLR, TRS, RCA |
| Power Output | 100W |
Covers instructions on water, cleaning, heat sources, cord protection, and accessory usage.
Highlights warnings regarding electrical shock and the need for proper grounding.
Details FCC and Canadian Department of Communications compliance for digital devices.
Advises on preventing hearing loss from high noise levels.
Explains how MRmk3 monitors improve mixing and monitoring with advanced features.
Discusses adaptable controls and multiple input options for various acoustic environments.
Lists applications including home studios, A/V broadcast, and post-production.
Details how room acoustics affect bass response and frequency adjustment controls.
Provides useful advice for operation, such as powering down sequence and saving receipts.
Instructions for connecting the power cord and locating the fuse.
Describes the function and operation of the monitor's power switch.
Details the available input connectors: XLR, 1/4-inch, and RCA.
Explains how to tailor the low-frequency response by +2 dB or +4 dB at 100 Hz.
Details adjusting high-frequency response by ±2 dB at specific frequencies.
Describes adjusting the input sensitivity for optimal signal strength.
Explains the port's role in extending low-frequency response.
Describes the function of the illuminated Running Man logo LED.
Details the high-pass filter preventing woofer damage from excessive low frequencies.
Explains how thermal switches protect amplifiers from overheating.
Notes on magnetic shielding for use near CRT displays.
Recommends shielded cables and warns against connecting speaker outputs.
Provides instructions for cleaning and maintaining the studio monitors.
Guides users through checking power connections, switches, and fuses.
Helps diagnose problems related to no audio output from the monitors.
Addresses issues like distortion, poor bass, or null frequencies.
Provides solutions for common audio interference problems.
Details the wiring and pinout for balanced XLR connections.
Explains the wiring and use of unbalanced RCA connectors.
Describes the Tip-Ring-Sleeve connections for balanced audio.
Provides frequency response and sound pressure level data.
Lists woofer, tweeter, and amplifier power ratings.
Details crossover frequency, type, sensitivity, and equalization settings.
Specifies voltage, fuse, and power consumption for different regions.
Provides enclosure dimensions and unit weights for MR5mk3, MR6mk3, MR8mk3.
Illustrates the dimensions and weight of the MR5mk3 monitor.
Illustrates the dimensions and weight of the MR6mk3 monitor.
Illustrates the dimensions and weight of the MR8mk3 monitor.
To Next Page
