Need help?Do you have a question about the Mackie PPM1008 and is the answer not in the manual?
General| Brand | Mackie |
|---|---|
| Model | PPM1008 |
| Category | Music Mixer |
| Language | English |
Details on connecting the AC power cord and operating the power switch.
Information on connecting passive speakers using Speakon or 1/4" TS connectors.
Explains the three-position switch for selecting amplifier signal paths.
Covers cooling requirements and the mixer's integrated carrying handles.
Introduction to the connection area and details on MIC, LINE, RCA, and INSERT inputs.
Explains output/send connections, FX Footswitch, and POWER AMP INPUTS.
Covers gain switches, channel level, and input signal indicators.
Details the 3-band EQ for mono and 4-band EQ for stereo channels.
Explains compressor, Hi-Z switch, and FX/MON 2 send controls.
Controls for the main stereo mix, including graphic EQ, level, rumble reduction, and meters.
Controls for the monitor mix, including graphic EQ, level, rumble reduction, and meters.
Details internal effects, FX/MON 2 send master, presets, tap delay, and mute.
Indicates when the power amplifier is overloading and the limiter is active.
Provides solutions for common channel and output issues.
Information on warranty service and finding authorized service centers.
Explains XLR, 1/4" TS, 1/4" TRS, and RCA connector standards.
Details on insert jacks, Speakons, loudspeaker cables, and their wiring.
Details on distortion, noise, frequency response, gain, and output levels.
Covers impedances, connections, power, dimensions, and EQ specifications.
Provides physical measurements and weight of the powered mixer.
Illustrates the internal signal flow and component interactions within the mixer.
Lists and describes the available internal effects presets.
To Next Page
