Do you have a question about the Mackie PPM Series and is the answer not in the manual?
USB Connectivity | No |
---|---|
Phantom Power | +48V |
EQ | Yes |
EQ Bands | 3-band |
Aux Sends | 1 |
Inputs | XLR, 1/4" |
Outputs | 1/4" |
Headphone Output | 1/4" TRS |
Illustrates a mono PA setup for small club gigs using the 408M mixer.
Demonstrates a stereo PA setup for small club gigs using the 408S mixer.
Shows a mono PA configuration for larger venues using the 808M mixer.
Details connecting an auxiliary amp to reinforce FOH speakers with the 808S.
Explains integrating subwoofers and an electronic crossover with the 808S.
Illustrates using an external mixer with PPM amplifiers for the 808S.
Shows how to patch an external band's mixer into the 808S system.
Details INPUT LEVEL SET, VOLUME, and PAN controls on each channel strip.
Explains the 3-Band EQ, including LOW, MID, and HI frequency adjustments.
Describes EFX/MON sends, EMAC processor, EFX controls, and preset selection.
Covers MONITOR/MAIN EQs, RUMBLE REDUCTION, output level controls, and meters.
Details BREAK switch, POWER AMP ROUTING, COMPRESSOR, and TAPE IN LEVEL.
Explains the POWER switch and connecting microphones and line-level signals.
Describes using INSERT jacks and EFFECTS SEND/RETURN connectors for external gear.
Details MIXER LINE OUT, MONITOR LINE OUT, TAPE I/O, and POWER AMP IN connections.