2/7 PAGES
PPM608
PROFESSIONAL
POWERED MIXER
PPM608 SPECIFICATIONS
Noise Characteristics
Equivalent Input Noise (EIN), mic input, 150 source impedance,
20 Hz to 20 kHz –128 dBu
(1 kHz, 30 kHz bandwidth)
Main mix level down, all channel levels down –95 dBu
Main mix level 0 dB, all channel levels down –86 dBu
Main mix level 0 dB, all channel levels 0 dB –77 dBu
Gain
Mic mono input 25 dB / 45 dB
Line mono inputs 0 dB / 20 dB
Line stereo inputs 0 dB
Frequency Response
Mic mono input (+0 / –3 dB) <10 Hz to 80 kHz
Line mono inputs (+0 / –3 dB) <10 Hz to 40 kHz
Line stereo inputs (+0 / –3 dB) <10 Hz to 75 kHz
Distortion (THD+N)
(1 kHz, 30 kHz bandwidth)
Mic mono <0.005% / <0.007%
Line mono <0.005%
Line stereo <0.01% at main out
Maximum Input Levels
Mic mono input –5 dBu / –25 dBu
Line mono inputs +21 dBu / +1 dBu
Line stereo inputs +21 dBu
Maximum Output Levels
Preamp main and monitor outputs +21 dBu
Loudspeaker Outputs
(Both channels loaded and driven at 1 kHz)
Peak output power @ 4
2 x 500 W peak
RMS output power @ 4
2 x 250 W rms, 1% THD
2 x 300 W rms, 3% THD
RMS output power @ 8
2 x 150 W rms, 1% THD
2 x 180 W rms, 3% THD
Recommended load impedance 4 – 8
per channel
Equalization
High Shelving ±15 dB @ 12 kHz
Mid Peaking ±15 dB @ 2.5 kHz
Low Shelving ±15 dB @ 80 Hz
7-Band Graphic EQ ±15 dB @ 125, 250, 500,
Main and Monitor 1 1k, 2k, 4k, and 8 kHz
Digital Effects
Processor 32-bit
I/O Mono input / Stereo output
Number of presets 24
Impedances
Mic mono input 3.6 k balanced
Line mono input 20 k
balanced
Line mono input, Ch 5, 6 Hi-Z 500 k
unbalanced
Main and monitor preamp outputs 240
balanced
120
unbalanced
To Next Page
Loading...
