EasyManua.ls Logo

Mackie ProFXv3+ Series - FX Section

Mackie ProFXv3+ Series
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROFXV3+ MULTI-CHANNEL ANALOG MIXERS WITH ENHANCED FX, USB RECORDING MODES, AND BLUETOOTH®
35
FX Section
The ProFXv3+ FX engine is incredibly powerful and packed with a ton of features.
There are 2 eects to choose from, but each one of those may be manipulated and tweaked to your inclination.
Before diving in, though, let’s take a look at a table of the 2 eect types with a description of each preset and some examples.
Note that the eects are presented in four sets of three:
• Eects -3 – Delays – Virtual Knob Color = blue
• Eects 4-6 – Reverbs – Virtual Knob Color = red
• Eects 7-9 – Modulations – Virtual Knob Color = purple
• Eects 0-2 – Multi-purpose – Virtual Knob Color = yellow
Number Title Description Example of its use
1 Delay This eect repeats the source signal in even increments,
later in time, defined by the time setting. The feedback
control increases / decreases the amount of repeats.
This works best with full, up-beat
music like rock where the delay needs
to cut through the mix.
2 Echo This type of delay eect repeats the source signal twice.
It has a characteristic of a double repeat like a voice reflecting
o the walls of a canyon. The timing and amount of repeats
are defined by the time and feedback settings.
Also known as Slap Back Echo, use it
to make a vocal or guitar stand out
in the mix without extra volume.
3 Slapback This eect provides a single or double, relatively rapid delay of the
original signal with minimal repeats through the feedback setting.
Slapback is generally used to mimic vocals –
and sometimes drums – on ’50s-era rock ’n roll.
4 Hall Reverb This reverb is characterized by its large,
spacious sound, long pre-delay and vibrant tone.
Adds life to acoustic instruments and vocals
from solos to full-on symphonies and choirs.
5 Room Reverb This preset features a medium sized room sound, with just
enough enhancement of the lower mids to produce a warm tone.
Useful for any instrument or vocal source
to sound like it’s in an acoustic space that
is like a recording studio. Try running the snare,
horn section, or acoustic guitar on this one!
6 Plate Reverb Plate reverbs emulate vintage mechanical reverberation
that is generated with a metal plate. Its sound
is characterized by lots of early reflections and no pre-delay.
Perfect for adding a long sustain
to percussion like tambourine,
hand-claps, and backup vocals.
7
8
Chorus 
Chorus 2
These presets provide a sof, ethereal sweeping eect that is useful
for thickening and for making a particular sound pop out of the mix.
Perfect for enhancement of electric
and acoustic guitar and bass, or to add
a dramatic eect to vocals, particularly
group harmonies and choirs.
9 Flanger The flange eect is a modulated delay with feedback (and shorter
delay times than a chorus), which creates the characteristic
“whooshing” sound ofen used to describe the flange sound.
Check out the electric rhythm guitar
on the song “Barracuda” by Heart.
10 Delay + Reverb Don’t choose delay, don’t choose reverb!
Get the best of both worlds with eects preset #0!
Useful for bands that employ the alternative
rock, shoegaze and/or experimental rock sound.
11 Delay + Chorus Don’t choose delay, don’t choose chorus!
Get the best of both worlds with eects preset #!
Pink Floyd guitarist, David Gilmour,
ofen used this eect in his setup.
12 Reverb + Chorus Don’t choose reverb, don’t choose chorus!
Get the best of both worlds with eects preset #2!
Really thicken things up with this preset.
The chorus creates a slightly detuned version
of the signal blended with the normal signal,
while the reverb emulates the bouncing
of sound waves across dierent-sized venues.

Table of Contents

Related product manuals