Page 4 of 32
IMPORTANT INFORMATION (READ CAREFULLY)
Never expose the flowmeter register assembly to atmospheric agents as that may result in a deterioration of ex-
plosion protection and an increased risk of explosion.
Any alteration to the product (e.g. removal of the 3 plugs (IP67) on the housing, installation of cable glands, etc)
may result in a deterioration of explosion protection and an increased risk of explosion. Macnaught will not accept
any liability resulting from alterations to the product.
Only sound IP67 cable glands must be on the register housing to pull signal cable out of the register. Installation
must be carried out by qualified and trained personnel only. Macnaught will not accept any liability resulting from
use of cable glands.
INSTALLATION / SURROUNDING CONDITION
Extreme weather condition can deteriorate IP67 rated
equipment
Take necessary precautions against moisture
Take actions to avoid excessive Vibrations
Relative humidity must be less than 90% RH
Service/Repairs:
Don’t Service/Repair on-site as that may compromised explosion proof protection.
Contact Macnaught for Service/Repairs.
To Next Page
Loading...
