- 2 -
Contents
Safety and warning information 3 - 4
Measures to preserve the surface finish 5
Setting the turn-only, turn&tilt and tilt-first sash 6 - 11
Setting the scissor stay or turn-only hinge - sash part – lift/lower 6 - 7
Setting the scissor stay or turn-only hinge – gasket compression 7 - 8
Pivot post setting 9 - 11
Tilt-only sash setting 12
Setting the closing element, the bullet catch and
the sash lifter 13
Hinging and unhinging the sash 14 - 15
Exchange of window rebate seals 16
WARNING! These maintenance instructions are only
intended for certified specialists and their trained
employees.
In addition to these maintenance instructions, the
operation and maintenance instructions for the
end user must always be observed (757071EN).
These instructions can also be downloaded from
www.maco.eu, order number 757070EN.
To Next Page
Loading...