GB-3
PRECAUTIONS
1. Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to
malfunction or damage the vehicles electrical system.
2. Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel
speaker cables each other or to the vehicle body.
3.Make sure all the connections are completely correct before turning on your unit.
4. When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder.
5. Do not block vents or radiator panels. Doing so many cause heat to build up inside and may result in fire.
6 .After completing the installation and beginning to play the unit (including replacing the battery),please press
RESET button on the front panel with pointed object (such as ballpoint pen) to set the unit to initial status.
Replacing the Fuse
Make sure the amperage matches the specified value when replacing the fuses.
If the fuse is blown, check the power connection and replace with a new one.
If the same problem occurs, lt would be subjected to the malfunction in-house.
In such cases, please consult the nearest service dealer.
WARNING:
Never use the fuse with the rated amperage more than that supplied to your unit, otherwise the unit maybe
damaged.
To Next Page
Loading...
Need help?
General