MADER KM0408312 - SAFETY AND OPERATING PROCEDURES; Warnings and Safety Rules

GRAPHIC WARNINGS
Because a trimmer/cutter is a high‐speed tool with fast cutting power, special safety precaution must
be observed to reduce the risk of personal injury. Read this manual carefully. Be familiar with the
controls and the proper use of the unit. Know how to shut it offhand how to unhook a harnessed unit
quickly.
This graphic accompanied by the words WARNING and DANGER calls attention to an act
of a condition which can lead to SERIOUS INJURY.
WEAR SAFETY BOOTS
WEAR SAFETY GLOVES.
READ & UNDERSTAND Operator's Manual and Safety Manual.
ALWAYS WEAR EYE AND EAR PROTECTION.
WEAR HEAD PROTECTION WHERE THERE IS A RISK OF FALLING OBJECTS
Always TURN OFF ENGINE and make sure the cutting tool has stopped
before cleaning, removing or adjusting blade.
KEEP BYSTANDERS AWAY AT LEAST 15M/50FEET
WARNING!Nevermodifyatrimmerorcutterinanyway.Improperuse
o
f
any trimmer can cause SERIOUS OR
FATALPERSONALINJURY.
WARNING! DO NOT TOUCH HARD WOOD;STONE;STEEL.
WARNING DANGER
Theengineexhaustcontainschemicalsto cause cancer, birth defects, of other
reproductive harm.