MADRIX LUNA - Software and Driver Installation

9
Installing The MADRIX
®
Software And Drivers
Insert the CD that comes with MADRIX
®
LUNA into the CD-ROM drive of your
operational computer. The MADRIX
®
software setup will load automatically.
Follow the on-screen installation instructions as described below.
PLEASE INSTALL THE SOFTWARE AND DRIVERS FROM THE CD
BEFORE YOU CONNECT MADRIX
®
LUNA TO YOUR PC.
First, the ‘MADRIX Setup Wizard’ will be launched. Click ‘Next’ to start the
installation. You may abort the process at any time by clicking ‘Cancel’.
Second, the ‘License Agreement’ will appear. It outlines the terms you are
agreeing to when you install the software. You must accept these terms in
order to continue. Please click ‘I Agree’.
Third, the ‘Choose Components’ window offers the chance to select which
components and which drivers you want to install. A description is given for
each item. Please make sure to select ‘MADRIX’ as well as ‘MADRIX KEY
Driver’, which are the most important items for operating MADRIX
®
LUNA with
MADRIX
®
. Please click ‘Next’.
Fourth, the section called ‘Destination Folder’ allows you to select the location
on your harddisk where the software will be installed. Please use the button
‘Browse...’ to choose a location and then click ‘Install’.
The installation process may take a few minutes.
Fifth, when the ‘Complete’ window appears, click ‘Next’.
Sixth, click ‘Finish’ to complete the installation process.