12
English
DMX Input Settings
If DMX-IN is used, MADRIX
®
LUNA will automatically send the data via Art-Net
Remote to the network (when connected). Use the web configuration interface
to change relevant settings (Art-Net Universe and Broadcast/Direct IP Mode).
Receiving Art-Net Remote in MADRIX
®
or receiving DMX-IN data via USB
requires additional configuration in MADRIX
®
. For more information, please
read the MADRIX
®
user manual.
Further Information
Digital documentation files are automatically installed with the MADRIX
®
software. More information about the software and how to connect MADRIX
®
LUNA is provided in the MADRIX
®
Help And Manual. You can also open the
software user manual by pressing ‘F1’ on your keyboard or by navigating to the
menu ‘Help’ à ‘Help…’ while using the MADRIX
®
software.
The latest quick start guide and updates for the MADRIX
®
software, including
drivers and documentation, are available online at http://www.madrix.com
Support
In case of further questions concerning handling of MADRIX
®
LUNA or technical
problems, please read the MADRIX
®
Help And Manual first, contact your dealer,
or have a look at the website http://www.madrix.com
You can also directly contact info@madrix.com
FCC Declaration Of Conformity
The device has passed the following tests of compliance:
FCC (2003) - Title 47, Part 15, class A, Radio frequency devices.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To Next Page
Loading...
