Maeda MC-285C - Page 3

0-1
CONTENTS
ITEM
Page
INTRODUCTION
1- 1
1. Foreword
1- 2
2.Safety Information
1- 3
3. Outline of the Machine
1- 4
3.1 Designated type of work
1- 4
3.2 Configuration of the machine
1- 4
3.3 Functions this machine is provided with
1- 5
4. Qualification for Operating the Machine
1- 6
4.1 Qualification require for operating cranes
1- 6
5. Glossary
1- 7
5.1 Definitions of words
1- 7
5.2 How to read working radius and lifting height diagram
1- 8
5.3 How to read total rated load chart
1- 9
5.4 How to read load indicator
1-14
SAFETY
2- 1
1. Basic Rules
2- 2
2. Rules for Operation
2- 8
2.1 Before starting up engine
2- 8
2.2 After the engine has started
2- 9
2.3 During crane operation
2-13
3. Rules for Transporting a Crane
2-21
4. Rules for Handling the Battery
2-23
5. Rules to Observe in Connection with Services
2-25
5.1 Prior to conducting services
2-25
5.2 During service work
2-27
6. Location for Affixing Caution Plates
2-32
OPERATION
3- 1
1. Nomenclature of Components
3- 2
1.1 Nomenclature of components
3- 2
1.2 Nomenclature of travel control components
3- 3
1.2.1 Control levers and pedals
3- 4
1.2.2 Switches
3- 6
1.2.3 Meters and switches
3- 7
1.3 Nomenclature of crane control components
3- 9
1.3.1 Control levers
3-10
1.3.2 Switches
3-11
1.3.3 Meters and lamps
3-13
1.4 Over-hoist alarm system
3-14
1.5 Machinery cover
3-15