Maeda MC-285C - Page 4

0-2
ITEM
Page
2. Operation and Controls
3-16
2.1 Before starting engine
3-16
2.1.1 Walk-around checks
3-16
2.1.2 Checks before starting
3-18
2.2 Starting the engine
3-37
2.2.1 Starting the engine with main starter switch
3-37
2.2.2 Start the engine with main starter switch in cold weather
3-38
2.2.3 Starting the engine with auxiliary starter switch
3-39
2.3 Operation and checking after engine has started
3-40
2.4 Break-in operation
3-42
2.5 Travel position of the machine
3-42
2.6 Starting the machine
3-43
2.7 Change travel direction of the machine
3-44
2.8 Stopping and parking the machine
3-45
2.9 Stopping the engine
3-46
2.10 Inspection and check after stopping the engine
3-46
2.11 Rules for travelling
3-47
2.12 Setting up the outrigger
3-48
2.13 Matters to be known before starting crane work
3-53
2.14 Operations prior to starting crane work
3-54
2.15 Crane work position
3-55
2.16 Hoisting and lowering operation
3-56
2.17 Boom hoisting and lowering operation
3-56
2.18 Boom telescoping operation
3-57
2.19 Swing operation
3-58
2.20 Accelerator lever operation
3-59
2.21How to use load indicator and load meter
3-60
2.22 Stowing the crane
3-63
2.23 Stowing the outrigger
3-64
2.24 Matters prohibited in connection with crane operation
3-67
3. Handling of Rubber Tracks
3-69
3.1 Smart way of using it
3-69
3.2 Warranty
3-69
3.3 Prohibited types of work
3-70
3.4 Rules for using it
3-71
4. Handling of Wire Rope
3-73
4.1 Standard for wire rope replacement
3-73
4.2 Measures to take when winch wire rope is twisted
3-74
5. Transport
3-75
5.1 Loading and unloading
3-75
5.2 How to lift the machine
3-76
5.3 Rules for loading
3-77
5.4 Rules for transport
3-77
6. Handling in Cold Climate
3-78
6.1 Preparation for low ambient temperature
3-78