Maeda MC285C-3 - Page 9

0-7
Item
Page
ELECTRIC MOTOR
7- 1
PRINCIPAL ENGINE AND ELECTRIC MOTOR SPECIFICATIONS - COMPARISON TABLES
7- 1
1. ELECTRIC MOTOR UNIT ASSEMBLY
7- 2
1.1 POWER UNIT
7- 4
1.2 HYDRAULIC PUMP (MOTORIZED) - APPEARANCE AND SPECIFICATIONS
7- 5
2. ELECTRIC MOTOR WIRE HARNESS ASSEMBLY
7- 6
2.1 COMPONENTS OF POWER SUPPLY BOX
7- 7
2.2 INVERTER PANEL
7- 10
2.3 POWER SUPPLY CONNECTION
7- 11
2.4 MAINTENANCE AND INSPECTION
7- 12
2.4.1 DAILY INSPECTION
7- 12
2.4.2 PERIODIC INSPECTIONS
7- 13
2.5 NOTES REGARDING DISPOSAL
7- 15
3. INSTALLING ELECTRIC MOTOR UNIT
7- 16
3.1 REMOVING ELECTRIC MOTOR UNIT
7- 16
3.2 MOUNTING ELECTRIC MOTOR UNIT
7- 18
4. ELECTRIC MOTOR TROUBLESHOOTING
7- 19
5. ELECTRICAL WIRING DIAGRAM
7- 20
SEARCHER HOOK
8- 1
1. NAMES OF SEARCHER HOOK PARTS
8- 2
2. CHANGING SEARCHER HOOK ANGLE
8- 3
3. CHANGING TO THE SEARCHER HOOK MODE
8- 5
4. SEARCHER HOOK POSITION SETTINGS
8- 7
5. TROUBLESHOOTING
8- 8
6. WORKING RADIUS AND RATED TOTAL LOAD
8- 9
6.1 WORKING RADIUS / LIFTING HEIGHT DIAGRAM FOR SEARCHER HOOK
8- 9
6.2 RATED TOTAL LOAD TABLE FOR SEARCHER HOOK
8-10
AUXILIARY WINCH
9- 1
1. COMPONENTS OF AUXILIARY WINCH
9- 2
2. MONITOR
9- 3
2.1 DESCRIPTION OF HOME SCREEN
9- 3
2.2 DESCRIPTION OF USER MODE
9- 4
3. METHOD FOR REMOVING AND INSTALLING BOOM HEAD
9- 5
3.1 INSTALLING BOOM HEAD
9- 5
3.2 REMOVING BOOM HEAD
9- 10
4. AUXILIARY WINCH ASSEMBLY
9- 11
5. AUXILIARY WINCH ACCESSORIES ASSEMBLY
9- 12
5.1 AUXILIARY WINCH ACCESSORIES
9- 12
5.2 OVER-HOISTING PREVENTION DEVICE
9- 13
5.3 AUXILIARY WINCH THREE-WIND STOP
9- 14
5.3.1 OVER UN-WINDING DETECTOR
9- 15
5.3.2 IRREGULAR WINDING PREVENTION ROLLER
9- 15
6. APPEARANCE AND MODEL OF AUXILIARY WINCH MOTOR
9- 16
7. HYDRAULIC PIPING FOR AUXILIARY WINCH
9- 17
8.TROUBLESHOOTING AND COUNTERMEASURES
9- 19
8.1 WINCH MOTOR PROBLEMS
9- 19