23
Using the Memory Programmes
INFORMATION
ACTION
1 Open Door.
Put in Food.
CLOSE DOOR.
The oven lamp will come on.
Oven lamp turns off.
2 Press
Number Pads required.
eg. For programme 03.
Press Number Pads 0 and 3.
This example is preset Memory Programme:
SIMMER power 20 mins.
3 Press START.
Display window will count down time.
DISPLAY
Programme Lock
If programme lock is activated, programme starts
immediately therefore there is no need to press START
Pad.
Programme Lock
It is NOT possible to enter a programme when
Programme Lock is set.
Multi-stage (Sequential Cooking)
It is possible to programme into the memory a 2 or 3
stage programme using MICROWAVE, CONVECTION,
GRILL, FAN GRILL, GRILL CONVECTION or
COMBINATION.
Changing a Memory Programme
To change a programme simply follow steps 1-6 on
previous page entering your new programme.
Setting the Memory Programmes
Please ensure SD Memory Card is inserted in the oven.
To Next Page
Loading...
